中文
igutek P360 bevel gears - transmission 1:2
- Increased wear resistance
- Good tribological specifications
- Robust
- Resistant to shock loads
Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.
The axes of the bevel gears are perpendicular to each other.
The bevel gears listed here (1:2) can be combined with each other. Please ensure the same module is selected.
Calculate the service life now. Click here
Not found the right geometry? Click here
Part No.
Module
Number of teeth
Dimensions
Fold
Ø d1 bore diameter [mm]
5 Fold
Module
1 Fold
b3 [mm]
10.5 Fold
b2 [mm]
6.4 Fold
a [mm]
26.3 Fold
b1 [mm]
17.1 Fold
d5 [mm]
16.6 Fold
Mechanical properties
Fold
Transmission
1:2 Fold
Modulus of elasticity [MPa]
1300 Fold
Modulus of elasticity test method
Test method ASTM D790 Fold
Flexural strength (at 20°C/68°F) [MPa]
50 Fold
Flexural strength (at 20°C/68°F) test method
Test method ASTM D790 Fold
Thermal properties
Fold
Lower application temperature [°C]
-30 Fold
Requirements
Fold
Number of teeth
15 Fold
Module
1 Fold
Material
igutek P360 Fold
Colour
light beige Fold
Density [g/cm³]
1.24 Fold
Max. moisture absorption [Wt.- %]
0.5 Fold
Max. moisture absorption test method
Test method ASTM D570 Fold
Max. total moisture absorption [Wt.- %]
2.1 Fold
Max. water absorption test method
Test method ASTM D570 Fold
Helix angle [°]
0 Fold
Sales Consulting
